You should make sure that the contractor is licensed and insured in the area that you live in, and you should ensure that they will apply and pay for all of the required licenses and permits to do the work on your project. Hometown Heating and Cooling Inc. not only meets the requirements above but also continues to attend seminars on the latest technological advances, newest products, building codes, and job site safety. We can also provide you with a free, comprehensive, in home evaluation of your HVAC needs, including, an assessment of your equipment, duct work, venting, and heat loss calculations. A thorough assessment by a trained expert will guarantee that you get the right size and model of equipment installed for your home’s needs. You don’t want any surprises when your gas and electrical bill comes! We can answer any questions concerning new products, energy efficiency ratings, how to gain savings on your utility bills, or repair and replacement services. Since we install only the best, most trusted brands, you’ll have the peace of mind you’ve been looking for.
HVAC stands for Heating, Ventilating and Air Conditioning. Since this is what we focus on, you know that we are going to offer the most advanced, current, and efficient equipment and installation techniques that the industry has to offer.
This is probably the most common question we get! Since we install high quality and high MERV rated filters in all of our systems, we recommend replacing them with the same filters to keep your efficiency up and your utility bills down. These filters cost more than the standard 1″ filters that other companies install, but they trap more particles and last up to 1 year versus the 1 month life span of the standard 1″ filters. Overall they cost the same at the end of the year (1 filter vs. 12) and they do a better job. However we can get just about any filter that you need.
MERV stands for Minimum Efficiency Reporting Value. MERV is a standard ratings system set up by ASHRAE, the American Society of Heating, Refrigerating and Air-Conditioning Engineers. MERV is a way of comparing the efficiency of air filters without having to look at all the technical details provided by manufacturers. Its simple, the higher the MERV rating, the more efficient the filter.
SEER stands for the Seasonal Energy Efficiency Rating. EER stands for Energy Efficiency Ratio. The U.S. government requires an efficiency rating of all air conditioning equipment. There are special names for the efficiency ratings of various types of equipment. Air conditioning equipment is rated by the Seasonal Energy Efficiency Rating, or SEER. The higher the SEER rating, the more efficient the unit. Even though the Energy Efficiency Ratio or EER is not required to be posted by the government, it is similar to the SEER rating, except that the EER rating is a tougher testing process. An EER rating is based on a tougher heat load performance test and this means that the higher the EER rating, the more efficient the unit when it is under tough loads more similar to real life cooling.
HSPF stands for Heating Seasonal Performance Factor. The U.S. government requires an efficiency rating of all air conditioning and heating equipment. There are special names for the efficiency ratings of various types of equipment. Heat pump equipment in the heating mode is rated by the Heating Seasonal Performance Factor, or HSPF. The higher the HSPF rating, the more efficient the unit. Heat pump equipment in the cooling mode is rated by a SEER rating as explained in the previous question.
AFUE stands for Annual Fuel Utilization Efficiency. The U.S. government requires an efficiency rating of all furnaces. There are special names for the efficiency ratings of various types of equipment. Gas furnaces are rated according to their Annual Fuel Utilization Efficiency, or AFUE. The AFUE rating reflects the percentage of energy used efficiently, with a high rating indicating high-efficiency.
This is probably the 2nd most frequently asked question that we get. Recently the temperature in Montana has been reaching over the 100°F mark in our summer months. While it is usually not that hot every day, an air conditioning system will make your home more comfortable. Air conditioning adds value to your home and while you do not need it for survival, it will make our hot summer days much more enjoyable when you want to get out of the sun and feel that cold air surround you when you enter your home. The way we look at it, you would not buy a new car without air conditioning, so why would you buy a new home without it?
Preferably auto. That way, the fan operates only when the temperature requires it. This is the most used and the most efficient setting. However, there are advantages to using the “on” setting. While set to the “on” setting air is constantly filtered through the systems air filter, and the constantly circulating air results in an even temperature throughout the house. For those homeowners who have a VisionPRO thermostat installed, you have a “circ” option. Circ stands for circulate. What this means is that when your system has not called for heating or cooling within 1 hour, the thermostat will turn the fan on for 20 minutes to ensure air circulation and filtering.
No. Rheem® heat pumps operate year-round and should never be covered. Similarly, air conditioners that operate seasonally are built to withstand an outdoor environment and should not be covered.
Yes. However, we recommend that plants be no closer than 18 inches to the unit. This allows for plenty of room for air circulation in and out of the unit. Without this room for air circulation, the unit could overheat, resulting in a premature need for service.
Yes. Rheem® air conditioning and heat pump units are designed to operate as a complete, matched system. The efficiency rating is based on the entire system. Replacing the entire system ensures the system will be reliable and efficient.
An HVAC system that’s too small won’t keep your home comfortable and one that is oversized will not maintain acceptable humidity levels or be efficient. Oversized systems cycle (turn on and off) more than necessary; this cycling wastes precious, expensive energy; puts undue strain on components like compressors; and often reduces the expected life of the system. Hometown Heating and Cooling, Inc. will determine the optimal size of HVAC equipment for your home by making a careful study of your heating and cooling requirements. We will consider many factors before making a recommendation. Such as … size of the house, climate, the number and type of windows installed, insulation, and even the number of people living in your home.
A Load Calculation is a scientific process that uses industry-standards that take into account the number of windows and doors in your home, window dimensions, and average number of hours of sun exposure. Subtleties like shade trees and shrubbery in your yard, open floor space, the R-value of wall, floor, and roof insulation, local climate patters, and design and condition of your current central duct system, number of heat-generation appliances, they type of interior furnishings, number of fireplaces, and many other factors effect in unique ways the heating and cooling requirements of every HVAC system.
We do offer more products than what you have seen here. This website is intended to give you a general idea of what we offer. We have access to just about any HVAC product you can think of. If we do not currently stock it, we will do our best to locate what you are looking for, and offer it at a great price!
First, let us offer our condolences. To answer your question though, Yes. We install the best and service the rest! We have successfully serviced many brands of HVAC equipment. Unfortunately you do not have the industries’ #1 most dependable furnace, Rheem! (Consumer Reports 2007) That means that your furnace is slightly more prone to failure, however we have access to just about any part that you may need, and a knowledgeable service technician to get your system up in running again no matter what brand you own.
A heat pump is similar to an air conditioner in the sense that it pumps refrigerant through copper line sets removing heat from your home’s air and pumping outside through the condenser, resulting in a cooling effect. What makes a heat pump a heat pump is that it has a reversing valve that can reverse the flow of refrigerant. With reversing in mind, the heat pump is now removing heat from the outside air and pumping it to the indoor coil which transfers the heat into your home’s air, resulting in a heating effect. The heat pump is powered by electricity rather than fuel which will significantly reduce your energy bill. The heat pump system is very efficient, even more efficient than a furnace, but it can only produce so much heat. There is a point in temperature outside when the heat pump can not keep up with the amount of heat that your home loses. That point is called the “balance point” and it is determined by how much heat your heat pump is producing compared to how much heat your home is losing. Anything colder than the balance point means that the heat pump can no longer keep up with the heat loss of your home which now requires a larger source of heat, like a furnace.
A dual fuel or hybrid system is a system that incorporates a furnace and a heat pump to heat your home. Usually what happens in a Dual Fuel system is this. When we get our really cold Montana weather (30°F and below) the furnace efficiently heats the house, but when the temperature rises, it is more efficient to heat your home using a heat pump. At about 30°F or above, our system switches from the furnace to the heat pump. Through a process explained in the previous question, the heat pump is now heating your home without using any fuel which means you are now experiencing significant savings in your heating bill depending on the quality of insulation in your house and the efficiency of the heat pump. As an added bonus, when the hot summer gets here, you have air conditioning, because the heat pump will reverse the flow of refrigerant back to the cooling cycle, bringing you all the benefits that an air conditioner has to offer.
During the heating cycle a heat pump removes heat from the outside air. Water will condense and run on the ground near the outdoor unit. If it is 47° or colder it will automatically defrost itself periodically. This will cause cool, harmless steam to rise from the heat pump.
When we size a system, we size it for the coldest days in Montana. A single-stage furnace is going to run at full capacity whether it’s -40° or +40° outside. In other words, it’s heating at 100% capacity every time it gets a demand for heat from the thermostat. A two-stage furnace is more efficient because it will begin heating at a reduced capacity of 70% which is a sufficient amount of heat on milder winter days. When the temperature drops and your home finally needs that extra 30% the furnace steps it up to the second stage at full capacity and heats your home on those frigid cold days in Montana. That saves you money and adds comfort because your furnace is using less fuel most of the time in the first stage and heating more evenly because the temperature rise is not as drastic as a single stage furnace. This is where the competition ends and Rheem takes it to a whole new level. A Rheem® modulating furnace has the ability to make the energy efficient fan and the burners modulate down to 40% capacity and everywhere in between. Rheem® calls it, a furnace with a brain. It measures the outdoor temperature, the indoor temperature, and the temperature rise in the air ducts, then it makes the calculation on what will be the most efficient and comfortable heating capacity for your home. That means when it is 30°F outside and your home only needs 24,000 btu, it’s only going to get 24,000 btu. Well maybe we have a storm moving in and it’s going to get colder? No problem. The modulating furnace will give your home what it needs when it needs it. It’s like having 14 furnaces to choose from at any given moment and since it’s a Rheem®, you can relax, knowing that you have the best, most reliable furnace there is.
IAQ stands for Indoor Air Quality. The air inside a climate controlled home can become laden with indoor contaminants such as dust, animal dander, air borne microbial, and food and tobacco odors. EPA studies show that the air inside can be 2-5 times, and up to 100 times, more polluted than the outside air. The tighter the home is (proper weather stripping, good installation, storm windows) the more likely a whole house IAQ system is needed to continually remove these potentially harmful contaminants. Hometown Heating and Cooling Inc., offers both Rheem® and Honeywell® IAQ solutions that can make your indoor air quality fresher and cleaner.
These are just frequently asked questions. We can answer any question you might have. Just click on the contact us link.